background image

To Turn On AUTOHOLD System

Press the AUTOHOLD switch and
when the AUTOHOLD standby
indicator light turns on, the
AUTOHOLD function turns on.

1. AUTOHOLD standby indicator light

NOTE

When all of the following conditions
are met, the AUTOHOLD standby
indicator light turns on when the
AUTOHOLD switch is pressed and the
AUTOHOLD function turns on.

x

The power switch is switched ON
(EV system on).

x

The driver's seat belt is fastened.

x

The driver's door is closed.

x

There is no problem with the
AUTOHOLD function.

To operate AUTOHOLD and hold the
brakes

1. Depress the brake pedal and bring

the vehicle to a complete stop.

2. The AUTOHOLD active indicator

light in the instrument cluster turns
on and the brakes are held.

3. The vehicle is held in its stopped

position even with the brake pedal
released.

NOTE

When all of the following conditions
are met, the AUTOHOLD operates and
the brakes are held.

x

The power switch is switched ON
(EV system on).

x

The vehicle is stopped.

x

The brake pedal is being depressed.

x

The AUTOHOLD active indicator
light turns on.

x

The accelerator pedal is not
depressed.

x

The driver's seat belt is fastened.

x

The driver's door is closed.

x

There is no problem with the
AUTOHOLD function.

x

The parking brake is released.

x

There is no problem with the Electric
Parking Brake (EPB) function.

x

The selector lever is in a position
other than R position or the vehicle
tilts forward with the selector lever in
the R position.

To release AUTOHOLD and start
driving the vehicle

If you try to resume driving the vehicle,
the brakes will be released
automatically and the AUTOHOLD
active indicator light turns off.

NOTE

x

If the Electric Parking Brake (EPB)
switch is pulled while the
AUTOHOLD is operating, the
parking brake is applied and the
AUTOHOLD is released. In addition,
if the parking brake is released under
this condition, the AUTOHOLD
operates to hold the brakes.

When Driving

Brake

4-61

Summary of Contents for MX-30 2020











































































































































































































































































































































































































































































































































































































































Reviews: