manualshive.com logo in svg

Mazda MX-30 2020, Owner'S Manual, Page: 323 / 618

Share
Download
Mazda MX-30 2020 Owner'S Manual Download Page 323

Collision warning

If there is the possibility of your vehicle
colliding with a vehicle approaching
from the rear on the left or right, or
from the rear while you are driving in
reverse, a warning sound is activated
continuously and a warning is
displayed on the multi-information
display and the active driving display.

Multi-information display

1. “BRAKE!” message is displayed
 

Active driving display

1. “BRAKE!” message is displayed

NOTE

During brake control, the collision
warning sound is activated
intermittently.

▼

Stopping the Smart Brake Support
(SBS) System Operation

The SBS can be changed to inoperable.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
 
When the SBS is cancelled, the SBS
OFF indicator light turns on.

NOTE

When the power switch is switched
OFF while the SBS forward drive
detection is cancelled, the SBS forward
drive detection is automatically
enabled the next time the power
switch is switched ON.

When Driving

i-ACTIVSENSE

4-156

Summary of Contents for MX-30 2020











































































































































































































































































































































































































































































































































































































































Reviews:

No comments