Mazda MX-30 2020, Owner'S Manual

Page: 68 / 618

▼
Junior Seat Installation Position
A junior seat is used in the front-facing
position only.
We recommend the use of the junior
seat with backrest to allow simple
adjustment of the shoulder belt
position and to give your child the best
protection.
Refer to the table, “Child-Restraint
System Suitability for Various Seat
Positions” for junior seat installation
position (page 2-42).
WARNING
Always install a junior seat in the
correct seat position:
Installing a junior seat without first
consulting the table “Child-Restraint
System Suitability for Various Seat
Positions” is dangerous. A junior seat
installed on the wrong seat position
cannot be properly secured. In a
collision, the child could hit something
or someone in the vehicle and be
seriously injured or even killed.
Do not install a front-facing
child-restraint system on the front
passenger seat unless it is
unavoidable:
In a collision, the force of a deploying
air bag could cause serious injury or
death to the child. If installing a
front-facing child-restraint system on
the front passenger seat is
unavoidable, move the front passenger
seat as far back as possible and adjust
the seat bottom (height adjustable seat
bottom) to the highest position at
which the seat belt fastening the
child-restraint system is securely
tightened.
Make sure that the front passenger air
bag deactivation switch is in the OFF
position. Refer to Front Passenger Air
Bag Deactivation Switch (page 2-54).
Essential Safety Equipment
Child Restraint
2-41