manualshive.com logo in svg

Mazda MX-30 2020, Owner'S Manual, Page: 241 / 618

Share
Download
Mazda MX-30 2020 Owner'S Manual Download Page 241

Forward Sensing Camera

(FSC)

▼

Forward Sensing Camera (FSC)

Your vehicle is equipped with a
Forward Sensing Camera (FSC).

1. Forward Sensing Camera (FSC)
 
The following systems also use the
Forward Sensing Camera (FSC).

x

High Beam Control System (HBC)

x

Adaptive LED Headlights (ALH)

x

Lane Departure Warning System
(LDWS)

x

Traffic Sign Recognition System (TSR)

x

Distance & Speed Alert (DSA)

x

Driver Attention Alert (DAA)

x

Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function)

x

Cruising & Traffic Support (CTS)

x

Lane-keep Assist System (LAS)

x

Emergency Lane Keeping (ELK)

x

Smart brake support (SBS) forward
drive detection

The Forward Sensing Camera (FSC)
determines the conditions ahead of
the vehicle while travelling at night and
detects traffic lanes. The distance in
which the Forward Sensing Camera
(FSC) can detect objects varies
depending on the surrounding
conditions.

CAUTION

Heed the following precautions to
assure correct operation of each
system.

¾

Do not hit or apply strong force to
the Forward Sensing Camera (FSC)
or the area around it. If the Forward
Sensing Camera (FSC) is severely hit
or if there are cracks or damage
caused by flying gravel or debris in
the area around it, stop using the
following systems and consult an
expert repairer (we recommend an
Authorised Mazda Repairer).

¾

HBC

¾

ALH

¾

LDWS

¾

TSR

¾

DSA

¾

DAA

¾

MRCC with Stop & Go function

¾

CTS

¾

LAS

¾

ELK

¾

SBS forward drive detection

¾

The Forward Sensing Camera (FSC) is
installed to the windscreen. Consult
an expert repairer (we recommend
an Authorised Mazda Repairer) for
windscreen repair and replacement.

¾

Do not remove the Forward Sensing
Camera (FSC) cover.

¾

Be careful not to scratch the Forward
Sensing Camera (FSC) lens or allow
it to get dirty.

¾

The direction in which the Forward
Sensing Camera (FSC) is pointed has
been finely adjusted. Do not change
the installation position of the
Forward Sensing Camera (FSC) or
remove it. Otherwise, it could result
in damage or malfunction.

When Driving

i-ACTIVSENSE

4-74

Summary of Contents for MX-30 2020











































































































































































































































































































































































































































































































































































































































Reviews:

No comments