Mazda MX-30 2020, Owner'S Manual

Page: 532 / 618

▼
Electronic Steering Lock Warning
Beep
The warning beep operates if the
steering wheel is not unlocked after the
power switch is pressed. (page 4-4)
▼
Brake System Warning Beep
A warning beep is activated if a
problem with the brake system occurs
and the brakes may not work as
intended. Decelerate the vehicle while
checking the safety of the surrounding
area, and park the vehicle in a safe
place. After stopping the vehicle,
contact an expert repairer (we
recommend an Authorised Mazda
Repairer).
▼
Brake Override Warning Beep
A warning beep is activated when the
accelerator pedal and brake pedal are
depressed at the same time while
driving. Only depress the brake pedal.
▼
Vehicle Problem Warning Beep
If any of the following problems occur,
a warning beep is activated. Check the
information regarding the warning
indication in the instrument cluster or
on the centre display.
x
Brake fluid amount decrease
x
Electric Parking Brake (EPB) problem
x
Shift control system problem
x
EV System problem
x
Charging system problem
x
Approaching vehicle audible system
problem
▼
Shift Position Warning Beep
A warning sound is activated when the
selector lever position and the shift
position of the vehicle do not match.
Check the selector lever position.
▼
Selector Lever Not In P Reminder
Warning Beep
A warning sound is activated if the
following operations are performed
while the selector lever is in a position
other than P.
x
The power switch is switched OFF
while the EV system is operating.
x
The driver’s seat belt is unfastened
and the driver’s door is opened.
Check the selector lever position.
▼
Electric Parking Brake (EPB)
Warning Beep
The warning buzzer is activated under
the following conditions:
x
The vehicle is driven with the parking
brake applied.
x
The Electric Parking Brake (EPB)
switch is pulled while the vehicle is
driven.
x
You attempt to start driving the
vehicle while the conditions for
releasing the Electric Parking Brake
(EPB) automatically have not been
met.
▼
AUTOHOLD Warning Beep
Message is displayed and beep sound
is activated simultaneously for about 5
seconds when using AUTOHOLD
function or when AUTOHOLD switch
is operated.
Because a problem with AUTOHOLD
function has occurred, AUTOHOLD
function does not operate even if
AUTOHOLD switch is operated.
If the message is displayed and the
beep sound is activated
simultaneously, have your vehicle
inspected at an expert repairer (we
recommend an Authorised Mazda
Repairer).
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-51