Mazda MX-30 2020, Owner'S Manual

Page: 173 / 618

x
If the function to start the EV system
only by carrying the key is disabled,
the EV system can be started using
the procedure for starting the EV
system when the key battery is dead.
x
When the charge connector is
connected to the charge port or
during charging, the EV system
cannot be started.
x
The vehicle can be driven while the
READY indication is displayed in the
instrument cluster.
1. Make sure you are carrying the key.
2. Continue to depress the brake
pedal firmly.
3. Make sure that the KEY indicator
light in the instrument cluster and
power switch indicator light (green)
turn on.
When the power switch indicator
light (green) is flashing, the key
battery might be depleted.
Refer to Starting the EV System
When the Key Battery is Dead on
page 4-7.
1. Indicator light
2. Power switch
4. Press the power switch with the
power switch indicator light (green)
turned on.
CAUTION
If there is a problem with the power
switch, the power switch indicator
light (amber) flashes. In this case,
the EV system could be started,
however, have the vehicle
inspected by an Authorised Mazda
Repairer as soon as possible.
NOTE
x
Under the following conditions,
the KEY warning light (red) flashes
in the instrument cluster or the
KEY warning indication is
displayed on the
multi-information display and the
EV system will not start:
x
The key battery is dead.
x
The key is out of operational
range.
x
The key is placed in areas where
it is difficult for the system to
detect the signal.
x
A key from another
manufacturer similar to the key
is in the operational range.
x
If the power switch indicator light
(amber) flashes, the EV system
could not start using the usual
starting method.
Depress the brake pedal
completely and continue to press
the power switch until the EV
system is started completely. After
the EV system has started, the
power switch indicator light
(green) turns off and the power
switch is switched ON.
When Driving
Starting and Stopping the EV System
4-6