MAGUIRE FLEXBUS Lite, Installation Operation & Maintenance

Page: 53 / 143

53
Setup Menu – Full Explanation
Setup is a password protected area for accessing Blender or System specific configuration
settings. Setup is accessible from the main screen by pressing:
Press Display will prompt for a password. (default: 22222) Then press:
Parameters – All WEIGH SCALE BLENDER controllers operate according to
certain internal PARAMETERS. Because customer requirements vary widely,
we have made a wide range of parameters accessible for change through the
touchscreen. Parameters are grouped into the following categories: Control
Times, Vibration Control, Weight Limits, Components, Regrind Control, Mixer
Control. Parameters are covered on page 54.
Setup is divided into two categories: Blender Configuration and System Configuration.
Blender Configuration
Includes device specific settings such as: parameters, component type setup,
operating options, specialized operations, specialized alarms, manual operations,
timed operations and calibration routines.
System Configuration
Includes system wide general settings such as: Modes of operation, system
preferences, communications settings, print options, diagnostics and system resets.
The following section describes the features within the Setup Menu.