MAGUIRE FLEXBUS Lite, Installation Operation & Maintenance

Page: 126 / 143

126
Pump Assignment -
Pumps must be assigned before Receivers.
Flexbus Lite (part of the Maguire 4088 TS Weigh Scale Blender) controls a single pump. The
Flexbus System can control of to 5 pumps. If you have two or more pumps (Flexbus only), turn
OFF all pumps prior to running Setup in the Flexbus controller, otherwise: To assign Pumps,
follow these instructions:
On the
HOME
screen,
PRESS:
Pressing the SETUP button prompts for a password.
PRESS:
22222
Enter the password (default password is 22222)
Press
to confirm password.
This enters the Setup screen. This screen contains several setup specific options.
To setup
Pumps:
PRESS:
Press the large Pumps button on the far left of the
screen.
This enters the PUMP assignment screen. This gray screen contains any previously assigned
pumps. For first time setup, this screen is probably blank and no pumps have been assigned.
At this time, turn on your Flexbus Lite Pump to assign.
With a single pump, that pump will
appear on the screen and be labeled
with the number 1.
PRESS:
To return to the Setup screen. When you return to the
Setup screen, the Pump button will show the Setup
symbol on the Pump button indicating that you are
still in the Pump Assignment mode.
PRESS:
To Exit the Pump Assignment Mode . Setup icon
overlaying the button will disappear indicating you are
out of Pump assignment mode.