MAGUIRE FLEXBUS Lite, Installation Operation & Maintenance

Page: 135 / 143

135
Flexbus Lite System Setup Options
The Setup screen also allows for setting: Date and time, screensaver timeout,
screen brightness, screen calibration, updating Flexbus controller and
receiver/pump firmware, changing the password, language selection and date
format. To enter Setup press the Setup button on the home screen. Default
password is 22222.
Set Date and Time
Set Screen Brightness
Update Receiver and Pump Firmware
Requires a firmware update provided by Maguire Products Inc. Copy firmware
(.XUF file) to USB and insert USB into the controllers USB port. Press this
Update button. Press the green check
to start the update. The firmware
update will be copied from the flash drive to the Pumps and Receivers that
require the update (up-to-date firmware will not be changed). When the copy
has completed, you will be prompted to toggle power (off/on). Updates to
devices are logged in the Alarm/Event log.
Change Passwords
Set the Operator password and the Administrator password.
Operator Password - When enabled, all Pump and Receiver
parameter fields are password protected.
Administrator Password - Changes the Administrator
password.
Type the new password, then type the password again in the 2nd field to
confirm. Valid passwords are numbers 0-9, 1 to 6 characters long. Press the
green check
when complete.
Set Language