MAGUIRE FLEXBUS Lite, Installation Operation & Maintenance

Page: 128 / 143

128
Receiver Assignment
NOTE: If you are already entered into SETUP, skip the password step and go to the below.
On the HOME
screen PRESS: Pressing the SETUP button prompts for a
password.
PRESS:
22222
Enter the password (default password is 22222)
Press
to confirm password.
This enters the Setup screen. This screen contains several setup specific options.
PRESS:
Press the large Receivers button to enter the
Receiver assignment screen.
The gray screen contains any previously assigned Receivers. For first time setup, this screen is
probably blank and no Receivers have been assigned.
Turn on your Flexbus Receivers in
the order that you want then to be assigned.
Your receivers will appear on the screen and be
numbered in the order that they were turned on.
If necessary, pressing each receiver icon will allow you
to re-assign the ID number to a different unassigned
number.
Pump symbol in the pump panel to toggle the Pump
online or offline.
PRESS:
To return to the Setup screen.
When you return to the Setup screen,
the Receivers button will show the
Setup symbol on the pumps button
indicating that you are still in the
Receiver Assignment mode.
PRESS:
To Exit the Receiver Assignment
Mode
. Setup icon will disappear
indicating you are out of Receiver
assignment mode.
PRESS: To exit the Setup screen.