MAGUIRE FLEXBUS Lite, Installation Operation & Maintenance

Page: 30 / 143

30
PRESS
Component 1
Device number 1 will operate.
Press "1" repeatedly to observe operation.
PRESS
Component 2
Device number 2 will operate.
Press "2" repeatedly to observe operation.
REPEAT THIS SEQUENCE
For each dispense valve on your WEIGH SCALE
BLENDER.
Up to 12 outputs are possible numbered
Component 1
through to Component 12 . Only those connected to
devices will operate.
3. NOTE HOPPER NUMBERS
AT THIS POINT
NOTE which component NUMBER is assigned to each hopper.
You will want to know each hopper's correct component number.
FOR WSB 940 & WSB 1840
SERIES: On 9000 and 18000 gram, FOUR hopper compartment systems, facing the
Controller side of the blender:
Device 1 is the NEAR hopper, 2 the FAR hopper, 3 the LEFT CENTER,
and 4 the RIGHT CENTER hopper.
FOR WSB 100, 200 & 400
SERIES:
On 1000, 2000, and 4000 gram, FOUR hopper systems facing the
Controller side of the blender:
Devices 1, 2, 3, and 4 are counter-clockwise starting with far left corner
hopper.
FOR WSB 200, 400, 900 & 1800
SERIES: On 2000, 4000, 9000 and 18000 gram SIX hopper systems facing the
Controller side of the blender:
Devices 1, 2, 3, 4, 7, and 8 are counter-clockwise starting with far left
corner hopper.
FOR WSB 100, 200, 400, 900 &
1800 SERIES: On the blender Controller:
Device 5 is the LEFT Panel-front OUTLET.
Device 6 is the RIGHT Panel-front OUTLET.
4. OPERATE OTHER DEVICES
PRESS
Weigh Bin The weigh bin air solenoid will operate.
The weigh bin dump valve will open.
Press, "DUMP" repeatedly to observe operation.
PRESS
Mixer This key controls the mix motor outlet on the side of the controller.
The mixer motor will run.
Mix blade turns clockwise facing the motor shaft or 270º on Pneumatic Mix
Motors.
Mixer switch must be down; timed position.
PRESS Alarm The Strobe light and Beeper will operate.
Display will show
ALARM: ON
PRESS Hold The Flow Control Valve will operate.
(Under the mix chamber - this device is optional)
PRESS To return to the Home Screen.