MAGUIRE FLEXBUS Lite, Installation Operation & Maintenance

Page: 47 / 143

47
Changing Passwords
Access to the controller is limited by one or two passwords. Access to Setup information is restricted by
an Admin Password (default password is: 22222). If Operator Access is enabled (see above), access to
commonly used functions are further restricted with the Operator Password. If security is important and
restricted access is desired, it is important to change the passwords.
Press
Display will prompt for a password.
(admin default: 22222)
Then press:
Press
System Configuration
Display will show the System Configuration categories.
Press
Preferences
Display will show System Preferences categories.
Press
Change Passwords
Display will show three options, Change Admin Password,
Change Operator Password and Enable Password Mask.
Select the password you wish to change.
Check Enable Password Mask to hide the password and show
the asterisk instead of the password numbers when entering a
password.
Enter
the new password
then enter the password again to confirm.
Press
To save the changes or press the
red X to cancel and exit.