MAGUIRE FLEXBUS Lite, Installation Operation & Maintenance

Page: 29 / 143

29
Check Out Procedure
As you go through this procedure, if WHAT SHOULD HAPPEN, doesn't happen, see next section,
DIAGNOSTICS, for what to check.
MB/100/200 series models (3K load cells), display all weights in 1/10 grams (xxxx.x).
400/900/1800 series models (10K load cells) display weights in FULL grams, NO decimal point
(xxxxx). On this page we show all weights with NO decimal point.
Start with NO MATERIAL in any hoppers.
Be sure an AIR SUPPLY is connected.
Turn POWER SWITCH OFF (front of controller).
PROCEDURE: WHAT SHOULD HAPPEN:
1. POWER UP CONTROLLER / Blender
PLUG IN CONTROLLER Nothing should happen.
Air pressure should be holding ALL valves CLOSED.
This means all air cylinders are extended. If any slide gate or
flap is open, air lines are reversed.
If a FLOW CONTROL VALVE is installed, check it. The flow
control valve should be closed when power is off.
TURN POWER ON The display should briefly show a power-on splash screen
followed by the main home screen. Across the top of the
home screen will display: Model, ID number, Mode, Date and
Time.
The Home Screen
displays the Main
Touchscreen view, which
includes a summary view
of the blender including
all enabled components,
settings, material types,
actual weight of material in the weigh bin. This number
should be zero, plus or minus several grams ( 20) to (-20).
AT THIS POINT
Be sure the model number that displays matches your
blender model number. If this is not the case see two
sections ahead, SELECTING CORRECT MODEL.
TOUCH WEIGH BIN VERY LIGHTLY
Display should update the weight reflecting the light pressure
that you are exerting on the bin.
2. OPERATE DISPENSE DEVICES
PRESS
Display will show the Setup login screen.
PRESS
then, press
This enters the PROGRAM mode.
Display will show a menu of
options.
PRESS
Blender Configuration
PRESS
Manual Operations
Display will show all devices that can be manually
operated. Each button is a press to activate, press to
deactivate.