MAGUIRE FLEXBUS Lite, Installation Operation & Maintenance

Page: 51 / 143

51
Setup Menu Map – Brief Explanation
This section contains a brief explanation of the Setup menu. For detailed information see Setup Menu
Full Explanation starting on page 53.
► Setup (password protected) – Settings and Options Menus
► Blender Configuration – Blender specific settings
► Parameters – Controller Operation Parameters
► Control Times

SBO – Sensor Blow Off Control

STL – Settle Time Before Weigh Reading

DTI – Weigh Bin Max Empty

DLY – Delay Cycle Start
► Weight Limits

TL – Tare Weight Lower Limit

TH – Tare Weight Upper Limit

MAX – Weigh Bin Capacity Limit

FUL – Full Batch Weight
► Regrind Control

RHL – High Low Level Control

ROV – Regrind Level Control

ROC – Regrind percent to run as natural
► Additive Control

PTA – Additive as Percent of Total

PAR – Percent Additive as Regrind
► Vibration Control

BER – Bailout Weight Limit

WDF – Operation Weight Reading Difference

KDF – Calibration Weight Reading Difference
► Components – Parameters per component 1-12

RD – Retry Limit – Allow Weight Short

RP – Retry Limit – Allow Percent Short

AL – Standard Alarm – Retries Before Alarm

LA – Lag Time – Lag Time milliseconds per component

TI – Dispense Rate – Time

WT – Dispense Rate – Weight

PO – Pulsed Output / Timing

MI Limit Adjust – Minimum Rate

NC Limit Adjust – Limit Adjustment
► Mixer Control

FCV – Flow Control Delay Opening

MPO – Air Drive Mixer Timing

JOG – Jog Time

MIX – Mix Time
► Component Types – Sets the type of each component.
► Operating Options
► Precision Ratio – Precision Ratio of Natural and Additive
► Progressive Metering – Progressive metering per component
► Weigh Bin Dump Options – Weigh Bin operate once or twice
► Dispense Order – Order of dispensing of components
► End Empty/Full – Weigh Bin End Empty or End Full at end of cycle.
► Volumetric Operation – Timed dispense operation (not by weight).
► Alternate Liquid Color – Automatic switch over from component 10 to 11.