![background image](http://html1.mh-extra.com/html/magnetek/impulse-g-series-4/impulse-g-series-4_instruction-manual_3660463212.webp)
IMPULSE®•G+ & VG+ Series 4 Instruction Manual – February 2017
5-126
D5 5_0125
5099-G+/VG+S4
D6 5_0145
5130-G+/VG+S4
D7 5_0192
5172-G+/VG+S4
D9 5_0242
5200-G+/VG+S4
O02-05
Operator M.O.P.
Selects whether the ENTER key is
used when the frequency
reference is set by the digital
operator. The digital operator can
simulate a motor operated
potentiometer (M.O.P.) by setting
this parameter.
0, 1
0
0
Disabled
ENTER Key Required
1
Enabled
ENTER Key Not Required
NOTE:
This feature cannot be
used in conjunction
with infinitely variable
speed control.
O02-06
Oper Detection
If the digital operator is
disconnected from the inverter.
This parameter selects whether
the inverter detects this condition.
The operator is only detected
when the inverter is being
commanded locally.
0, 1
1
0
Disabled
1
Enabled
O02-07
FWD/REVSel@PwrUp
Determines the direction of the
motor at power up when operation
is assigned to the digital operator.
This parameter requires that drive
operation be assigned to the
digital operator.
0, 1
0
0
Forward
1
Reverse
O02-11
Test Mode Sel
Disables/enables the one-time slip
measurement after a non-
rotational auto-tune. Changing this
parameter is normally not
required.
0, 1
1
0
Disabled
1
Enabled
O02-15
Legacy RDSI
Legacy support for Hetronic RDSI. 0, 1
0
0
Disabled
1
Enabled
O02-19
ParameterSet Sel
Turns off writing to EEPROM
during a UV fault.
0, 1
0
0
Disabled
1
Enabled
Parameter
Display
Function
Range
Default
Summary of Contents for Impulse G+ series 4
