![background image](http://html1.mh-extra.com/html/magnetek/impulse-g-series-4/impulse-g-series-4_instruction-manual_3660463017.webp)
IMPULSE®•G+ & VG+ Series 4 Instruction Manual - February 2017
1-5
Introduction
Assessing the System Requirements
It is important to know how the drive will be utilized before working on installation and wiring. Please
know the requirements for the following components:
•
Speed control method(s) - i.e. stepped, stepless, infinitely variable
•
Braking method(s) - coast to stop, decel to stop, No Load Brake (NLB) Hoist
•
Power source voltage, number of phases, and kVA rating
•
Power source location
•
Wire size
•
Grounding location and method
•
Control wiring sources - i.e. cab, pendant, radio
Assessing the Drive Environment
When choosing a location for IMPULSE
®
•G+ & VG+ Series 4, perform the following steps:
1. Ensure that a three-phase 200 to 240 VAC 50/60 Hz power supply is available for a 230 VAC-
rated drive, a three-phase 380 to 480 VAC 50/60 Hz power supply is available for a 460 VAC-
rated drive, and a 500 to 600 VAC 50/60 Hz power supply is available for a 575 VAC-rated drive.
2. Ensure the encoder is supplied with +5 VDC or 12 VDC.
3. If the RMS encoder current requirement is greater than 200 mA, provide an auxiliary power
supply to the encoder.
4. Ensure that the drive-to-motor wiring distance is less than 150 ft. unless appropriate reactors,
filters, and/or inverter duty motor is used.
5. Ensure that the drive circuit wiring is protected or isolated from:
•
Ambient temperatures outside the range of +14°F to +140°F (-10°C to +60°C) at 2 kHz
carrier frequency.
•
Rain or moisture
•
Corrosive gases or liquids
•
Direct sunlight
•
Severe mechanical vibration
6. Ensure that the drive is housed in an appropriate NEMA-rated enclosure.
7. For severe-duty applications (long lifts, for example) or with 75-HP-or-greater motors, ensure
that the drive control system (including dynamic braking resistors) is adequately cooled, even
though the ambient temperature limit is not exceeded. For more information, contact Magnetek.
Summary of Contents for Impulse G+ series 4
