Magnetek Impulse G+ series 4, Instruction Manual

Page: 265 / 276

IMPULSE®•G+ & VG+ Series 4 Instruction Manual – February 2017
A-11
E01-08 Mid Voltage A Determined
by E1-03
230V: 0.0–
255.0
460V: 0.0–
510.0
575V: 0.0–
733.1
VAC 5-70
E01-09 Min Frequency Determined
by E1-03
0.0–150.0 Hz 5-70
E01-10 Min Voltage Determined
by E1-03
230V: 0.0–
255.0
460V: 0.0–
510.0
575V: 0.0–
733.1
VAC 5-70
E01-11 Mid Frequency B 0.0 0.0–150.0 Hz 5-70
E01-12 Mid Voltage B 0.0 0.0–733.1 VAC 5-70
E01-13 Base Voltage 0.0 0.0–733.1 VAC 5-70
E02-01 Motor Rated FLA ** ** A 5-73
E02-02 Motor Rated Slip ** 0.00–20.00 Hz 5-73
E02-03*** No-Load Current ** 0–[(E02-01)-
1]
A 5-73
E02-04 Number of Poles 4 2–48 -- 5-73
E02-05*** Term Resistance ** 0.000–
65.000

5-73
E02-06*** Leak Inductance ** 0.0–40.0 % 5-73
E02-07*** Saturation Comp1 0.50 0.00–0.50 -- 5-73
E02-08*** Saturation Comp2 0.75 E02-07–0.75 -- 5-73
E02-09*** Mechanical Loss 0.0 0.0–10.0 % 5-73
E02-10*** Motor Iron Loss ** 0–65535 W 5-73
E02-11 Rated Horsepower ** 0.00–650.00 HP 5-73
E03-02 Stopping Method 1 0, 1 -- 5-74
E03-03 Max Frequency 60.0 40.0–150.0 Hz 5-74
E03-04 Max Voltage ** 230V: 0.0–
255.0
460V: 0.0–
510.0
575V: 0.0–
733.1
VAC 5-74
E03-05 Base Frequency 60.0 0.0–150.0 Hz 5-74
E03-06 Mid Frequency A Determined
by E01-03
0.0–150.0 Hz 5-74
E03-07 Mid Voltage A Determined
by E01-03
230V: 0.0–
255.0
460V: 0.0–
510.0
575V: 0.0–
733.1
VAC 5-74
E03-08 Min Frequency Determined
by E01-03
0.0–150.0 Hz 5-74
Parameter Parameter Name Default Range Units Reference
* Initial value set by X-Press Programming (Table 4-6, 4-7, or 4-8 on pages 4-12, 4-13, and 4-14).
** Initial value dependent on drive size, which is determined by O02-04 (kVA Selection).
*** Value is automatically set during auto tuning.
**** 0.0–25.5 seconds is extended to 0.0–6000.0 seconds when B05-16 = 1.