90
[6] SPEED-UP PEDAL
The vehicle speed will increase when this pedal is
depressed.
[7] LEVELLING INSTRUMENT
If crane operation is performed with the machine tilted, tripping may be caused.
Search a place, while looking at the levelling instrument, where the machine body is in a level
state before starting crane operation.
If work is unavoidably performed on a slope, place planking or lay earth on the ground to make
the ground level.
This equipment (9) displays the inclination status of the
machine.
The inclination and direction of the machine can be
determined from the position of the air bubbles.
Use this to check whether the machine body stopped on the
work site is in a level condition.
2.6 LOCKING COVER
Use the starter switch key to open and close the locking
cover.
Method of opening and closing the locking cover
Securely insert the key to its root (A) before turning.
If the key is turned when not fully inserted, it may be broken.
When opening
1. Insert the key.
2. Turn the key and the cover can be opened.
When locking
1. Close the cover.
2. Turn the key and pull it out.
Summary of Contents for CC423S-1
