233
10.8 MAINTENANCE EVERY 1000 HOURS
Perform this maintenance in tandem with maintenance every 50, 100, 250 and 500 hours.
[1] OIL REPLACEMENT IN TRAVELLING MOTOR REDUCTION GEAR CASE
• As parts and oil become hot immediately after the engine stop, you may suffer burns. Begin
work after the temperature has dropped.
• Oil and the plug may pop out due to the internal pressure inside the case. Release the
pressure by loosening the plug slowly.
• Oil replacement quantity: 0.6 litres each for left and right
• Have an Allen key ready.
1. Make sure the plug (F) is facing up and that the plug (F)
and the plug (P) are positioned perpendicular to the
ground.
2. Place a container to collect the drained oil underneath
the plug (P).
3. Remove the plugs (P), (G) and (F) using an Allen key
and drain the oil.
4. Tighten the plug (P).
5. Refill the power line oil from the plug (F) hole.
6. When oil comes out of the plug (G) hole, install the
plugs (G) and (F).
[2] INSPECTION/ADJUSTMENT OF ENGINE VALVE CLEARANCE
Special tools are required for inspection and adjustment. Contact us or our sales service agent.
Summary of Contents for CC423S-1
