Maeda CC423S-1, Operation Manual

Page: 95 / 278

87
2.5 OPERATION LEVERS AND PEDALS
(1) Lock lever
(2) Left work equipment operation lever
(3) Right work equipment operation lever
(4) Accelerator pedal (5) Travel lever
(6) Speed-up pedal
(7) Levelling instrument
[1] LOCK LEVER
• When standing up from the operator’s seat, place the lock lever securely in the lock position.
If the lock lever is not in the lock position, and inadvertent contact is made with the operation
levers and operation pedals, serious physical injury may result.
• When pulling up or pushing down the lock lever, be careful not to contact the operation lever
of the work equipment.
This lever (1) locks crane operation and travelling.
When the lever is pulled up, the lever stand springs up and
enters the lock position (L).
Since this lock lever is of hydraulic lock type, the work
equipment operation levers will move even when set to the
lock position (L), but the crane and travelling motor will not
move.
NOTES
The engine cannot be started when the lock lever is in the
free position (F). Set the lock lever to the lock position (L)
and then operate the starter switch.