Maeda CC423S-1, Operation Manual

Page: 101 / 278

93
2.8 FUSE
Be sure to turn off the power (set the starter switch to the “OFF” position) before replacing a
fuse.
CAUTION
Protects electrical components and wires from being burnt out.
Be sure to replace the fuse if it is corroded, shows white powder, or sits loosely within its
holder.
When replacing a fuse, use a replacement which has the same capacity.
The fuse box is installed under the operator’s seat.
Fuse capacity and circuit name
No.
Fuse
capacity
Connection table
(1) 10A Emergency operation power supply
(2) 5A Operation switch
(3) 20A Controller I/O power supply
(4) 5A Controller K15, Monitor power supply
(5) 10A Headlamps, Boom working lamp
(6) ― ―
(7) 10A Horn
(8)
― ―
(9) ― ―
(10) ― ―
(11) 5A PPC lock
(12) ― ―
(13) ― ―
(14) 5A
Layered rotating lamp, Audible
warning equipment
(15) 5A
Controller control power supply,
Monitor control power supply
(16) 10A ECU output power supply
(17) 5A IOT unit power supply
(18) 10A Starter SW B
(19) 5A Starter SW ACC secondary side
(20) 5A Starter SW C secondary side