Maeda CC423S-1, Operation Manual

Page: 209 / 278

201
9. INSPECTION AND MAINTENANCE LIST
Inspection and maintenance items
Page
10.1 FIRST MAINTENANCE OF NEW MACHINE
203
10.1.1 INITIAL 50 HOURS MAINTENANCE
203
[1] REPLACEMENT OF ENGINE OIL AND ENGINE OIL FILTER 203
[2] INSPECTION/ADJUSTMENT OF FAN BELT TENSION 203
10.1.2 INITIAL 500 HOURS MAINTENANCE
203
[1] OIL REPLACEMENT IN WINCH REDUCTION GEAR CASE 203
10.2 PRE-OPERATION INSPECTION
203
10.2.1 INSPECTING AND ADJUSTING BEFORE STARTING ENGINE
(VISIBLE CHECKS) (Refer to Operation section 3.1.1)
95
[1] INSPECTION AROUND CRANE 96
[2] INSPECTION OF WIRE ROPE 96
[3] INSPECTION OF HOOK BLOCK 96
[4] INSPECTION AROUND UPPER SLEWING BODY 97
[5] INSPECTION AROUND OPERATOR’S SEAT 97
[6] INSPECTION OF BASE CARRIER 97
10.2.2 PRE-OPERATION INSPECTION (Refer to Operation section 3.1.2)
98
[1] INSPECTION/REFILLING OF ENGINE COOLANT 98
[2] INSPECTION OF OIL LEVEL AND REFILLING OIL IN ENGINE OIL PAN 99
[3] INSPECTION OF FUEL LEVEL 100
[4] INSPECTION OF OIL LEVEL AND REFILLING OIL IN WINCH REDUCTION GEAR
CASE
101
[5] INSPECTION OF OIL LEVEL AND REFILLING OIL IN HYDRAULIC OIL TANK 102
[6] INSPECTION OF DUST INDICATOR 103
[7] INSPECTION OF WATER SEPARATOR 103
[8] INSPECTION OF ELECTRIC WIRING 104
[9] INSPECTION OF HORN FOR OPERATION 104
[10] ADJUSTMENT OF OPERATOR’S SEAT 105
[11] ADJUSTMENT OF MIRRORS 107
10.2.3 OPERATIONS AND CHECKS BEFORE STARTING ENGINE
(Refer to Operations section 3.1.3)
108
10.2.4 INSPECTION AFTER STARTING ENGINE
(Refer to Operation section 3.1.4)
109
[1] INSPECTION OF EASE OF ENGINE CRANKING AND ABNORMAL NOISE 109
[2] INSPECTION OF LOW SPEED AND ACCELERATION STATE OF ENGINE 109
[3] INSPECTION OF ENGINE EXHAUST GAS COLOUR, ABNORMAL NOISE AND
VIBRATION
109
[4] INSPECTION OF CRANE OPERATIONS 110
[5] INSPECTION OF OVER HOISTING PREVENTION DEVICE 111
[6] INSPECTION OF MOMENT LIMITER 111