Maeda CC423S-1, Operation Manual

Page: 76 / 278

68
[1] STARTER SWITCH
Always turn the starter switch to the “OFF” position at the end of work.
Use this switch to start and stop the engine.
• OFF
The key can be inserted and removed, the electrical system
current is turned off except to the lights and the engine is
stopped.
• ON
Electricity flows through the charging circuit and lights circuit.
Keep the switch at this position while the engine is running.
• START
A position where the engine starts. Keep the key at this position during cranking and when the engine
has started, immediately release your hand from the key. The key automatically returns to the “ON”
position.
The engine of this machine has the automatic remaining heat
function. If the engine does not crank when it is cold, AUTO
GLOW lamp illuminates. When the lamp illuminates, wait until the
lamp goes out and then, turn the switch to the START position to
start the engine.
NOTES
The engine does not start unless the lock lever is at the lock (L)
position. Check that the lock lever is at the lock (L) position
before operating the starter switch.
[2] HORN SWITCH
When the switch on the centre of the knob of the right work
equipment operation lever is pressed, the horn sounds.