Maeda CC423S-1, Operation Manual

Page: 267 / 278

259
4. Remove the linchpin (6) from the tip of the position pin (5)
and remove the position pin (5).
5. Align hole (8) of the E-boom (7) with hole (9) of the
bracket.
6. Pass the position pin (5) removed in Step 4 through the
hole (9) of the bracket and fix the linchpin (6) to the tip of
the position pin (5).
Be sure to fix the position pin (5) with linchpin (6). If
the position pin (5) detaches during operation, there is
a risk of serious accident.
7. Remove the linchpin (11) from the tip of the position pin
(10) and remove the position pin (10).
8. Move the E-boom (7) to an angle appropriate for the work
and align the holes of the E-boom (7) and the bracket (1).
Depending on the boom angle, the E-boom and hook
may interfere with each other, potentially leading to
serious accidents. Be sure to adjust to an angle
appropriate for the work.