Maeda CC423S-1, Operation Manual

Page: 263 / 278

255
[1] SEARCHER HOOK SELECTOR SWITCH
When performing searcher hook operation, be sure to select the position that matches the
position for the actual machine.
If you do not perform position settings correctly, the moment limiter will not operate properly,
and there is a risk of serious injury through overturning.
For details concerning the position, see “Searcher Hook 1.1 Moment Limiter Settings”.
When the searcher hook selector switch is pressed and held,
the position of the searcher hook changes, and the moment
limiter display switches to match the position.
NOTES
For continuous switching, press and hold to change in the
order “SH1
→ SH2 → SH3 → No display → SH1
· · ·
”.
[2] SEARCHER HOOK POSITION DISPLAY
The position currently set is displayed.
• SH1
• SH2
• SH3
• No display (stowage = normal crane)
NOTES
For details concerning switches and display contents not described in this section, see “Operation 2.1
Machine Monitor”.