Maeda CC423S-1, Operation Manual

Page: 54 / 278

46
NEVER DISASSEMBLE THE RECOIL SPRING
Under no circumstances, refrain from disassembling the recoil spring assembly.
In the recoil spring assembly that is intended for buffering the idler, a strong spring is installed.
An inadvertent disassembling it causes the spring to jump out, inviting a serious bodily accident.
Contact us or our sales service agency if its disassembling is required.
BE CAUTIOUS OF COMPRESSED AIR
When using the compressed air for cleaning, there is a risk of serious bodily accident because of
scattering waste objects.
Be sure to wear goggles, dust mask and gloves.
CAUTIONS WHEN TREATING WASTE
In respect of the environment protection, pay sufficient attention to
the treatment of waste matters.
• Be sure to use drums and tanks to hold the discharged waste
liquid. Never allow waste liquid to flow on the ground, into river,
drainage, sea or lake.
• Observe the applicable legal regulations and rules when
disposing of this machine as well as harmful substances such as
oil, fuel, solvent, filter or battery.
PERIODIC REPLACEMENT OF IMPORTANT COMPONENTS
• To assure the prolonged and safe use of the machine, be sure to conduct the periodic replacement of
parts that are particularly related to safety such parts as hoses and seat belts. Materials of these parts
tend to change their properties with elapse of service time and will degrade, abrade and show fatigue
with repeated services, and thus may cause a serious bodily accident. Also, it should be noted that
their service life can hardly be determined by inspecting their appearance.
Refer to the descriptions under “Inspection and Maintenance 4. Periodic Replacement of Important
Components”.
• If any abnormality is observed in a critical part by appearance, replace it even if it has not reached the
time for regular replacement.