89
[4] ACCELERATOR PEDAL
Be aware of swinging loads etc. when using the accelerator pedal.
Do not use when travelling with a hoisted load as there is a risk of overturning.
Excessively raising the output power for operation may lead to operational errors, causing
serious physical injury.
Use this lever to adjust the engine speed or output during .crane
operation.
•
(a) Low idling:
Release your foot from the pedal.
•
(b) Full rotation: Depress the pedal fully.
CAUTION
When E mode is selected, full rotation does not occur
even if the pedal is depressed to position (b).
[5] TRAVEL LEVER
When the track frame is facing backwards, the forward and backward driving operations will be
reversed.
When operating the travel lever, check whether the track frame is facing forwards or
backwards.
(When the sprocket (a) side is at the rear, the track frame faces forward.)
This lever is used to drive the machine.
•
(a) Forward motion: lever pushed forward
•
(b) Rearward motion: lever pulled towards the operator
•
(N) Neutral: the machine is stopped.
Summary of Contents for CC423S-1
