![background image](http://html.mh-extra.com/html/macdon/m205/m205_operators-manual_685753042.webp)
214603
22
Revision A
1000699
Figure 1.35: MD #166457
MD #166457
General hazard pertaining to machine operation and
servicing
CAUTION
To avoid injury or death from improper or unsafe machine
operation:
•
Read the operator
’
s manual and follow all safety
instructions. If you do not have a manual, obtain one
from your Dealer.
•
Do not allow untrained persons to operate the machine.
•
Review safety instructions with all Operators every year.
•
Ensure that all safety signs are installed and legible.
•
Make certain everyone is clear of machine before
starting engine and during operation.
•
Keep riders off the machine.
•
Keep all shields in place and stay clear of moving parts.
•
Disengage header drive, put transmission in Neutral and
wait for all movement to stop before leaving operator
’
s
position.
•
Stop the engine and remove the key from the ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging machine.
•
Engage locks to prevent lowering of header or reel
before servicing in the raised position.
•
Use slow moving vehicle emblem and flashing warning
lights when operating on roadways unless prohibited
by law.
Run-over hazard
WARNING
•
Machine will move if steering wheel is turned while
engine is running.
•
Steering response is opposite to what is normally
expected when backing up. Turn bottom of steering
wheel in direction you want to go.
•
Always move ground speed lever to slow end of range
before shifting high-low speed control.
•
Stop the engine and remove the key from the ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging the machine.
Summary of Contents for M205
