214603
149
Revision A
Testing the Rotary Disc Drive Circuit Activate Function Using the Cab Display Module (CDM)
IMPORTANT:
Do not overspeed a drive. Overspeeding can lead to vibration, belt failures, or other overspeeding related
problems.
NOTE:
•
A rotary disc header
MUST
be attached to windrower to follow this procedure.
•
The engine
MUST
be running to perform this procedure.
1022066
C###
X###
WINDROWER SETUP?
NO/YES
A
B
Figure 3.204: M205 CDM Programming Buttons
1.
Start the engine.
2.
Press PROGRAM (A) and SELECT (B) on cab display
module (CDM) to enter programming mode.
•
WINDROWER SETUP? is displayed on the
upper line.
1010019
DIAGNOSTIC MODE?
NO/YES
C###
X###
A
B
Figure 3.205: M205 Diagnostic Functions
3.
Press SELECT (B) until DIAGNOSTIC MODE? is
displayed in upper line.
•
NO/YES is displayed on the lower line.
4.
Press right arrow (A) to select YES. Press SELECT (B).
Summary of Contents for M205
