214603
119
Revision A
1010014
DRAPER SPEED
###.# HRS ENABLED
C###
X###
D
C
B
A
Figure 3.132: M205 Control Locks
6.
Press left (B) or right (C) arrow to cycle between control
switch lockouts. The displayed control switches are as
follows:
•
HEADER TILT
•
HEADER FLOAT
•
REEL FORE/AFT
•
DRAPER SPEED
•
AUGER SPEED
•
KNIFE SPEED
•
DISK SPEED
•
REEL SPEED
NOTE:
Not all control locks apply to every header.
7.
Press SELECT (D).
•
EXIT VIEW LOCKOUTS? is displayed on the
upper line.
•
NO/YES is displayed on the lower line.
8.
Press right (C) to select YES.
9.
Press PROGRAM (A) to exit programming mode or
press SELECT (D) to proceed to next WINDROWER
SETUP action.
3.19.10
Cab Display Options
The display and sound features of the cab display module (CDM) can be adjusted to suit each particular Operator.
NOTE:
The procedures listed in this section are current for cab display module (CDM) software version C512 and
windrower control module (WCM) X116. The WCM is supplied preloaded with the latest released version of the
operating software. Any subsequent updates will be made available via internet download from the MacDon Dealer
Portal
NOTE:
Pages may appear differently if running newer or older versions of software, and not all features are available on
every machine.
Summary of Contents for M205
