MacDon M205, Operator'S Manual

Page: 160 / 514

214603
140
Revision A
1010024
ACTIVATE FUNCTIONS?
NO/YES
C###
X###
B
A
Figure 3.182: M205 Functions
5. Press SELECT (B) until ACTIVATE FUNCTIONS? is
displayed on the upper line.
•
NO/YES is displayed on the lower line.
6. Press right arrow (A) to select YES. Press SELECT (B).
CAUTION
Check to be sure all bystanders have cleared the area.
1010025
ACTIVATE HEADER HT
DOWN/UP
C###
X###
D
C
B
A
Figure 3.183: M205 Header Height
7. Press SELECT (D) until ACTIVATE HEADER HT is
displayed on the upper line.
•
DOWN/UP is displayed on the lower line.
8. Press and hold left arrow (B) to lower header, or press
and hold right arrow (C) to raise header. Verify header is
functioning properly.
9. Press PROGRAM (A) to exit programming mode or
press SELECT (D) to proceed to next ACTIVATE
FUNCTION.
Testing the Reel Up/Down Activate Function Using the Cab Display Module (CDM)
NOTE:
•
This procedure is for draper headers only.
•
The header MUST be attached to the windrower to perform this procedure. The cab display module (CDM)
automatically adjusts its programming for each header. For more information, refer to 4.5 Attaching and
Detaching Headers, page 217 .
OPERATOR
’
S STATION