214603
184
Revision A
1000711
A
Figure 4.41: Lift Arms
8.
Remove pins (A) from lower end of lift linkages.
NOTE:
Pins (A) are also used to secure weight box to
windrower linkage.
9.
Release the safety props on the header lift cylinders. Refer to
4.4.1 Engaging and Disengaging Header Safety
Props: M Series Self-Propelled Windrower, page 194
.
10. Start the engine and lower header down onto the transport wheels.
1007609
A
B
Figure 4.42: Ground Speed Lever (GSL)
A - Header Tilt Down
B - Header Tilt Up
11. Use the HEADER TILT switches to release load on the
center-link if necessary.
12. Shut down the engine and remove the key from ignition.
Disconnect the center-link as follows:
1000720
A
B
Figure 4.43: Hydraulic Link
13. If using hydraulic link, disconnect the center-link as
follows:
a.
Pull up on latch (A), and position latch into
notch (B) on top of hook.
b.
Release the safety props on the header lift
cylinders. For instructions, refer to
and Disengaging Header Safety Props: M Series
Self-Propelled Windrower, page 194
c.
Lower the header down onto the transport wheels.
d.
Disengage top-link from the header. If necessary,
use the HEADER TILT switch to release load on the
cylinder.
Summary of Contents for M205
