214603
107
Revision A
1010002
PRESS HAZARD TO SET
ISC RPM ####
C###
X###
D
C
B
A
Figure 3.104: M205 ISC RPM
6.
Press right arrow (C) to cycle between rpm options.
Press HAZARD (B) to set.
7.
Press Select (D).
•
EXIT ENGINE ISC? is displayed on the upper line.
•
NO/YES is displayed on the lower line.
8.
Press right arrow (C) to select YES. Press SELECT (D).
9.
Press PROGRAM (A) to exit programming mode.
Clearing Sub-Acres
The windrower has two counters for acres: one counter tracks a total count of acres harvested for the machine
’
s
lifetime, and the other counter tracks sub-acres harvested for smaller harvesting instances (instances like
harvesting a particular field, or for a particular day). The total acres can
’
t be cleared from the windrower
’
s tracking,
but the sub-acres can be cleared between smaller harvesting instances.
1018668
C###
X###
A
Figure 3.105: M205 CDM
1.
With the key in the ON position, and the operator
’
s
station in cab-forward mode, press SELECT until the
cab display module (CDM) displays sub-acres on the
bottom line. Then press and hold the PROGRAM (A)
button on the CDM until the sub-acres are cleared.
3.19.8
Activating Cab Display Lockouts
You can lock some of the header functions controlled by the cab display module (CDM) to prevent accidental
changes to header settings. You can use this feature to keep header settings constant when several different
Operators use the windrower.
NOTE:
FUNCTION LOCKED flashes on CDM when locked header function switch is pressed.
Summary of Contents for M205
