MacDon M205, Operator'S Manual

Page: 97 / 514

214603
77
Revision A
3.19.2 Header Functions
Figure 3.69: Cab Display Module (CDM)
1000645
A
B
C
D
E
F
G
•
(A) DISPLAY
–
Header functions.
•
(B) SELECT SWITCH
–
Allows Operator to select display item on lower line. Push to SELECT.
•
(C) FLOAT SWITCH
–
Header Right Side: Changes header float. The system remembers setting with deck shift
option if activated with float setting switch. Push + to Increase. Push
–
to Decrease.
•
(D) FLOAT SWITCH
–
Header Left Side: Changes header float. The system remembers setting with deck shift
option if activated with float setting switch. Push + to Increase. Push
–
to Decrease.
•
(E) AUGER/DRAPER SPEED ADJUST: Changes auger/draper speed INDEX with INDEX SWITCH ON.
Changes auger/draper SPEED with INDEX SWITCH OFF. Push upper switch to increase. Push lower switch to
decrease.
•
(F) HEADER INDEX SWITCH: Links reel and conveyor speed to ground speed. Push-ON/Push-OFF.
NOTE:
Illuminates in ON position. (Header must be engaged)
•
(G) RETURN TO CUT HEIGHT SWITCH: Allows cutting height preset. Push-ON/Push-OFF.
NOTE:
Illuminates in ON position (Header must be engaged).
OPERATOR
’
S STATION