MacDon M205, Operator'S Manual

Page: 175 / 514

214603
155
Revision A
1010033
TO ACTIVATE PURGE
PRESS AND HOLD
C###
X###
B
A
Figure 3.219: M205 Hydraulic Purge
7. Press SELECT (B) until ACTIVATE HYD PURGE? is
displayed on the upper line.
•
NO/YES is displayed on the lower line.
8. Press right arrow (A) to select YES. Press SELECT (B).
•
TO ACTIVATE PURGE is displayed on the
upper line.
•
PRESS AND HOLD is displayed on the lower line.
NOTE:
Holding the right arrow (A) activates a timed
purge cycle. The CDM will jump to the exit menu if the
arrow is released before the end of the timed cycle.
CAUTION
Check to be sure all bystanders have cleared the area.
1010034
PURGE CYCLE STARTED
PRESS AND HOLD C###
X###
A
Figure 3.220: M205 Hydraulic Purge Cycle
9. Press and hold right arrow (A) to activate purge cycle.
•
PURGE CYCLE STARTED will display on the
upper line.
10. When PURGE CYCLE ENDED is displayed release
right arrow (A) .
•
NO EXIT YES is displayed on the lower line.
11. Press right arrow to select YES. Press SELECT.
12. Press PROGRAM to exit programming mode or press
SELECT to proceed to next ACTIVATE FUNCTION.
OPERATOR
’
S STATION