MacDon M 2009 Series, Assembly Instructions Manual

Page: 64 / 117

UNLOADING AND ASSEMBLY
Form 169542
64
Revision F
CAUTION
Check to be sure all bystanders have
cleared the area.
b. Start the engine, and activate HEADER DOWN
button on th e GSL to fu lly retract header lift
cylinders.
c. Slowly drive windrower forward so that feet (E) on
windrower enter boot s (B) on the header.
Continue to drive slowly forward until feet engage
the boots, and header nudges forward.
d. Adjust the position of the center-link cylinder with
the REEL UP and REEL DOWN switches, and
HEADER TILT switches on the GSL to position
the hook above the header attachment pin.
e. Lower the center-link onto the header with REEL
DOWN switch until it locks into position (handle is
down).
f. Raise the h eader fully with the HE ADER UP
switch on the GSL. Stop engine and remove key.
DANGER
To avoid bodily injury from fall of raised
header, always engage header lift
cylinder stops when working on or
around raised header.
g. Engage lift cylinder stops on both lift cylinders.
(continued next page)
HEADER UP
HEADER TILT UP
HEADER DOWN
HEADER
TILT DOWN
HEADER TILT UP
HEADER
TILT DOWN
REEL UP REEL DOWN
HEADER UP
E
B