MacDon M 2009 Series, Assembly Instructions Manual

Page: 43 / 117

UNLOADING AND ASSEMBLY
Form 169542
43
Revision F
STEP 17. INSTALL EXHAUST
STACK
A. M205
a. Open engine compartment hood.
b. Retrieve exhaust stack and clamp from inside the
cab.
c. Loosen clamp (A) on exhaust stack (B), and clamp
(C) on muffler (D).
d. Position stack (B) in sl ot in exhaust sh roud (E),
and connect stack (B) and clamp (A) to muffler
(D).
NOTE
If shroud (E) interferes with the stack,
loosen the wing-nut (F) on the shroud
and move the shroud so that stack can
be installed.
e. Tighten both clamps (A) and (C) but just enough
so stack can be moved.
f. Slowly close hood so that stack (B) e nters hole
(G) in hood. Adjust the position of the stack as
required to clear the hole in the hood.
g. Raise the hood.
h. Tighten clamps (A) and (C).
i. Reposition shroud, and tighten wing-nut (F).
A
B
D
C
F
E
B
B
G
D
B
A
C