UNLOADING AND ASSEMBLY
Form 169542
75
Revision F
I.
HEADER ATTACHMENT: A SERIES
Windrowers equipped with A-Series hydraulics
have four header drive hoses on the LH side.
The M155 and M105 are factory-equipped to run
the A-Series auger headers.
If necessary, obtain the following kit from your
MacDon Dealer, and install it in accordance with
instructions supplied with the kits.
KIT DESCRIPTION
KIT NUMBER
Basic Drive
B5491
Completion / Reverser
B5492
a. Remove hairpin from pin (A), and remove pin
from left and right header boots (B) on header.
IMPORTANT
To prevent damage to the lift system
when lowering header lift linkages
without a h eader or weight box
attached to windrower, ensure that
float engagement pin is installed in
storage location (C), and not
installed at hole location (D).
(continued next page)
B
A
D
C
Summary of Contents for M 2009 Series
