MacDon M 2009 Series, Assembly Instructions Manual

Page: 66 / 117

UNLOADING AND ASSEMBLY
Form 169542
66
Revision F
III. HEADER ATTACHMENT - R SERIES
The M205 is factory-equipped with hydraulics and
connections to run the R-Series Rotary Dis c
headers.
R85 16 and 19 FT headers are factory- equipped
with hydraulic connections for attachment to the
windrower.
R85 13 FT header and R80 13 and 16 FT
headers are shipped without the motor and hoses
installed, and the installation of a separate motor
and hose bundle is necessary.
a. If required, o btain kit n umber B5456 from your
MacDon Dealer, and install it in accordance with
the instructions supplied with the kit.
b. Remove hairpin from pin (A), and remove pin
from on left and right header boots (B) on header.
IMPORTANT
To prevent damage to the lift system when
lowering header lift linka ges without a
header or weight box attached to
windrower, ensure that float enga gement
pin is installed in storage location (C), and
not
installed at hole location (D).
(continued next page)
A
B
D
C