UNLOADING AND ASSEMBLY
Form 169542
46
Revision F
STEP 19. INSTALL BATTERIES
A. M205, M155
Batteries should meet the following specification:
RATING GROUP
CCA
VOLT
MAXIMUM
DIMENSION
Heavy
Duty,
Off-Road,
Vibration
Resistant
BCI 31A 750
(min)
12
13 x 6.81 x 9.44 in.
(330 x 173 x 240 mm)
a. Open right hand (ca b-forward) maintenance
platform.
b. A battery main disconnect switch is located on
the RH f rame rail b ehind the maintenance
platform, and can be accessed by moving the
platform. Ensure battery switch is switched to
POWER OFF position.
c. Remove cable ties securing battery clamps and
cables to frame.
d. Position new batteries on holder (A).
e. Install clamp (B) with bolts (C) provided, and
tighten securely.
IMPORTANT
BATTERY IS NEGATIVE GROUNDED.
Always connect starter cable to th e
positive (+) terminal of battery an d
battery ground cable to negative (-)
terminal of battery. Reversed polarity in
battery or alternator may r esult in
permanent damage to electri cal
system.
f. Attach positive (red) cable terminals (D) to
positive post on batteries, and tighten.
Re-position plastic covers onto clamps.
g. Attach negative (black) cable terminals (E) to
negative post on batteries, and tighten clamps.
h. Switch battery switch to POWER ON position.
i. Move platform back to closed position.
(continued next page)
D
C
B
C
A
E
Summary of Contents for M 2009 Series
