MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Centralized Telephone Programming
4-4
Program Extension
4
The sections that follow explain the use of menu selections for programming a
single extension (Program Extension), and for using one extension as a template
for programming several extensions of the same type (Copy Extension).
NOTE:
It is recommended that you use the programming codes for centralized
programming; however, you may also use the List Features option that is
available on the programming screen.
See ‘‘Using the List Feature Menu’’
for details about this option.
Program Extension
4
Review the items below before you begin to program extensions.
■
Use
to locate the code for the feature that you want
to program.
■
If you enter a feature code incorrectly or enter a feature code that is not
appropriate for the button, a beep sounds or the message
Programming
Error
appears and the green LED next to the button flashes. If this
happens, press the button again and repeat the procedure.
■
If you make a mistake and program the wrong feature on a button, follow
the steps below:
1.
Press the button.
2.
Select
Delete
(press
2
on the PC).
3.
Press the button again.
■
If you press a line button that is not active, the screen shown here appears.
Press Home to return to the Home screen.
■
You can use the Extension Information (
Ext
Info
) report option on the
Print menu to print all of the programmed features for a specific extension.
At the Centralized Programming menu, follow the procedure below to program
features onto a single telephone.
Blank
Press HOME to Exit
Page 1
Page 2
Sys Program
ListFeature