Lucent Technologies MERLIN LEGEND Release 7.0, System Programming Manual, Page: 748 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-546 Automatic Route Selection
3
Console Display/Instructions Additional Information PC
3. Select
ARS 1+7 Digit Dial.
4. Specify whether 1 plus 7-digit dialing is required within the home area code.
5. Save your entry.
Select
Enter.
6. Return to the System Programming menu.
Select
Exit
twice.
ARS Tables
3
Use this procedure for the following tasks:
■
To specify type of table (6-digit, area code, exchange,
or 1 plus 7-digit number)
■
To add or change area codes to be included in each table
■
To add or change exchanges to be included in each table
A maximum of 16 tables can be established, numbered 1 through 16. Each table
can have a maximum of 100 entries, numbered 1 through 100. Tables 17 and 18,
the Default Toll and Default Local tables respectively, cannot be changed.
The first entry in a 6-digit table must be the area code. Subsequent entries consist
of exchanges within that area code.
ARS: >
Make a selection
ARS 1+7Dial SubA Absorb
ARS Input Sub A Digit
Sub A Pools Sub B Start
Sub A FRL Sub B Stop
Exit Sub B Pool
1+7 Digit Dialing:
Select one
Within Area Code
Not within Area Code
Select
Within Area Code
Exit Enter
or
Not within Area Code.