MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-82
Lines and Trunks
3
l
Single-Line Procedure
3
Console/Display Instructions
Additional Information
PC
1.
Specify entry mode.
Select
Entry
Mode.
2.
Enter the line/trunk assigned to ring into the QCC queue.
3.
Assign or remove the line/trunk from the specified QCC operator.
Select
Enter
or
Delete.
You may continue to assign or remove
additional lines/trunks from the QCC
operator by repeating Steps 2 and 3.
4.
Continue to assign line/trunk to another QCC operator or go to Step 5.
Select
Next.
Return to Step 2. The next QCC
operator is displayed on Line 1.
5.
Return to the System Programming menu.
Select
Exit
twice.
QCC Operator xxxx:
xxxx
= extension number entered in
Enter line/trunk number
Step 4
Dial or type:
Ã
Delete
Trunk number
[nnn]
Backspace
Next
Slot and port number
*
[sspp]
Exit
Enter
Logical ID number
#
[nnn]
