MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-131
DS1 Facilities
3
Delete Digits Procedure
3
Console Display/Instructions
Additional Information
PC
1.
Erase the current number of digits to delete (
n
).
2.
Enter the new number of digits to delete (
n
=
0
to
4
).
Dial or type
[n].
Ã
3.
Save your entry.
Select
Enter.
4.
Return to the System Programming menu.
Select
Exit
four times.
Frame Format
3
Use this procedure to specify the framing format for the 100D module as
D4-compatible or Extended Superframe. Your selection must match the framing
mode at the far end of the DS1 facility.
NOTE:
In Release 6.0 and later systems, use the Extended Superframe format for
tandem PRI trunks.
Summary: Frame Format
3
Programmable by
System Manager
Mode
All
Idle Condition
100D module idle
Planning Form
3b, Incoming Trunks: DS1 Connectivity (100D module)
Factory Setting
D4-compatible
Valid Entries
D4, ESF
S56 Data Delete Digits:
Enter number of digits
to delete (0–4)
n
Backspace
Exit
Enter
Press Drop.
7%
+
I