Lucent Technologies MERLIN LEGEND Release 7.0, System Programming Manual

Page: 467 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-265 BRI Facilities
3
■
T305 Timer. Times the delay in network response when the
communications system sends a disconnect message to clear a call.
■
T308 Timer. Times the delay in network response when the
communications system sends a release message to clear a call.
NOTE:
If you enter an invalid timer value, you hear an error beep and the value that
was previously stored is displayed on the screen.
Table 3-5 shows the factory setting for each timer and the valid range for each
threshold.
Summary: Timers
3
Programmable by System Manager
Mode Key, Hybrid/PBX
Idle Condition Not required
Planning Form Form 3i, Incoming Trunks: BRI Options (800 NI-BRI
module)
Factory Setting See Table 3-5
Valid Entries See Table 3-5
Inspect No
Copy Option No
Console Procedure
LinesTrunks
→
More
→
BRI
→
Timers
→
Select
timer
→
Drop
→
Dial no. of seconds or ms
→
Enter
→
Exit
→
Exit
Table 3-5. Timers
Timer/
Counter
Purpose
Factory
Setting
Valid Range Increments
T200 Timer maximum response time 1,000 ms 500 to 5,000
ms 500 ms
T203 Timer maximum time 33 seconds 10 to 255 sec 1 sec
T303 Timer Set up timeout 4 seconds 2 to 10 sec 1 sec
T305 Timer Disconnect timeout 30 seconds 2 to 60 sec 1 sec
T308 Timer Release timeout 4 seconds 2 to 10 sec 1 sec