MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-439
Optional Group Calling Features
3
Console Display/Instructions
Additional Information
PC
7.
Enter the coverage group for which you want to assign the calling group as
receiver (
nn
=
1
to
30
).
8.
Assign or remove the coverage group as the receiver for the calling group.
Select
Enter
or
Delete.
You may continue to assign or remove
additional coverage groups as the
receiver for the calling group by
repeating Steps 7 and 8.
9.
Continue to assign the coverage group as the receiver for another calling group
or go to Step 10.
Select
Next.
Return to Step 7 to continue
programming. The next calling group is
displayed on Line 1.
10. Return to the System Programming menu.
Select
Exit
three times.
Group Calling Overflow and Thresholds
3
Use this procedure to designate either another calling group or the QCC queue
(Hybrid/PBX only) to receive overflow calls. This procedure also specifies
overflow threshold and methods.
Call overflow occurs in one of the three following ways:
■
The number of calls waiting in the queue for a calling group is equal to or
greater than the programmed threshold (overflow threshold).
■
The time that a call has spent in the queue exceeds the programmed
timeout value (overflow threshold time).
Group Calling xxxx:
xxx
= number entered in Step 5
Enter coverage group
number (1–30)
Delete
Backspace
Next
Exit
Enter
Dial or type
[nn]
.
Ã
