MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-56
Lines and Trunks
3
Console/Display Instructions
Additional Information
PC
2.
Specify touch-tone or rotary signaling for each block.
Toggle the green LED on or off as required:
On = touch-tone
Off = rotary
3.
Return to the System Programming menu.
Select
Exit
three times.
Rotary Trunk Digit Transfer
3
Use this procedure to designate whether dialed digits on rotary-dial lines/trunks
are sent one by one as they are dialed (no delay), or are stored and sent when
dialing is completed (delay). Contact your service provider for more information
about the appropriate setting.
Summary: Rotary Trunk Digit Transfer
3
Programmable by
System Manager
Mode
All
Idle Condition
Not required
Planning Form
Form 8a, System Features
Factory Setting
No Delay
Valid Entries
Delay, No Delay
Inspect
No
Copy Option
No
Console Procedure
Options
→
More
→
Rotary
→
Select option (delay or
no delay)
→
Enter
→
Exit
PC Procedure
→
→
→
Select option (delay or no
delay)
→
→
