MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-598
Night Service
3
l
Extensions Procedure
3
Console/Display Instructions
Additional Information
PC
1.
Specify the extension you want to assign to the Night Service group.
2.
Assign or remove the extension or extensions from the Night Service group.
3.
Return to the System Programming menu.
Select
Exit
twice.
Night Serv Group xxxx:
xxxx
= number entered in Step 4
Enter extension
If no DSS is attached:
SP: “Entering an Extension”
Ã
Delete
Backspace
Next
If DSS is attached:
Exit
Enter
Toggle the red LED on or
off as required. Then, go to Step 3.
On = extension assigned to group
Off = extension not assigned to group
Night Serv Group xxxx:
xxxx
= number entered in Step 4
Enter extension
xxx
Select
Enter
to assign
or
Delete
to remove your entry
Delete
and continue adding
Backspace
Next
or removing extensions from the Night
Exit
Enter
Service group by repeating Steps 1 and 2.
Select
Next
to save your entry and begin
assigning extensions to the next
Night
Service group (operator position).