MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-413
Optional Group Features
3
Console Display/Instructions
Additional Information
PC
5.
Save your entry.
Select
Enter.
6.
Specify the extension.
7.
Assign or remove the extension from the coverage group.
Select
Enter
or
Delete.
You may continue to assign or remove
extensions from the coverage group by
repeating Steps 5 and 6.
8.
Continue to assign the extension to another coverage group or go to Step 9.
Select
Next.
Return to Step 6 to continue
programming. The next coverage group
is displayed on Line 1.
9.
Return to the System Programming menu.
Select
Exit
twice.
Group Coverage Delay Interval
3
Use this procedure to specify the number of rings before a call is sent to group
coverage receivers.
NOTE:
This setting is for Release 4.0 and earlier systems. Use Group Coverage
Ring Delay for Release 4.1 and later systems.
Group Cover xx Senders
xx
= number entered in Step 4
Enter extensions
If no DSS is attached:
SP: “Entering an Extension”
Ã
Delete
Backspace
Next
If DSS is attached:
Exit
Enter
Toggle the red LED on or
off as required. Go to Step 8.
On = extension is sender in coverage group
Off = extension is not sender in coverage group
