MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-418
Optional Group Features
3
Console Display/Instructions
Additional Information
PC
5.
Enter the extension number of the calling group.
6.
Save your entry.
Select
Enter.
7.
Specify the extension.
8.
Assign or remove the extension from the calling group.
Select
Enter
or
Delete.
You may continue to assign or remove
extensions from the calling group by
repeating Steps 7 and 8.
Group Calling:
See
‘‘System Renumbering’’ on page 3-19
Enter extension number
for the factory setting for extension
of group
numbers assigned to calling groups.
If a non-local extension number is entered
Backspace
xxxx
is displayed.
xxxx
= the non-local
Exit
Enter
extension number.
Dial or type
[nnnn]
.
Ã
Group Calling xxxx:
xxxx
= number entered in Step 5
Enter group members
If no DSS is attached:
SP: “Entering an Extension”
Ã
Delete
Backspace
Next
If DSS is attached:
Exit
Enter
Toggle the red LED on or
off as required. Go to Step 9.
On = extension is a member of the calling
group.
Off = extension is not a member of the
calling group.
